11 Rework System Packages
 
Rework System Packages
  X-FineRework Series Rework System Packages

How to choose the best Rework System Package which will do what you need and will fit your budget?

  1. Choose from the table below the X-FineRework Series which is suitable for you.
    Each Series addresses different sizes of the boards, which you will need to work on. X-letter in the Series indicates that instead of a Pre-Heater Base you will have a base containing a Pre-heater and also Built-in Hot Air Pencil, Iron and Vacuum Pick-up.
  2. Go to the next table containing the Series, which you want, and select the exact combination of accessories which are the best for you.
  3. Make a note of the complete X-FineRework …… Part Number. This is Rework System Package that you need.

Table 1: List of different Series of the X-FineRework Units available for you.

This is base combination of our units to make new generation SMT Rework/Repair system offers precise and accurate monitoring of process temperatures at a working point on a PCB.

X-FineRework Series Your Choice of XK-Series Tool Holder and/or Illumination System 
Please Choose base combination, which BEST suites your needs Programmable, Intelligent SMT Rework/Repair Unit with connections at the back. Just Patented in US, Japan and Europe Digital PID Control SMT Rework/Repair Unit with integrated Pre heater, Hot Air Pencil, Iron and vacuum Pick-up Digital, High Power PCB Pre-Heater for Rework of SMT Technology Boards, with very accurate six zone temperature control Digital, SMT High Power, Large Area Under board Pre heater PCB Holder especially designed for this pre-heater to well support large boards Open Frame Board Holder with X Y micrometer positioning of PCB for boards up to 14" wide Universal, Retractable Board Holder for boards up to 12" wide
What it Contains FOCUS"X1" SMT-ServiCE X-1003 X-1001 XU-6 XU-5 XU-1S
X-FineRework-6L         X
X-FineRework-LX         X
X-FineRework-L         X
X-FineRework-SX         X
X-FineRework-S         X

All systems additionally include:

If you need any other, not listed combination, please contact either the distributor or factory direct at: bokar@bomir.com. We will certainly accommodate you and give you what you really need.

Please note that all X-KAR Subsystems are interchangeable. You will be able to add later any other subsystem if you needed. E.g. Use XK-4 instead of XK-2 or change manual lift for Auto-lift or interchange SMT-ServiCE with X-1001 Pre-heater etc.

Optional and absolutely recommended accessories:

  X-REWORK "A+" Basic Rework System
X-REWORK "A"

X-Rework "A+"
Basic rework system for all board sizes

The system has Top and Bottom Convection Heaters and Component pick-up by vacuum built-in the Hot Air Tool. Top and Bottom Heaters are controlled by digital PID independent controllers. The system has Universal Board Holder for Regular and irregular shape boards and a Tool Holder (Left and Right Handed) for smooth up/down motion of the Top Heating Tool with Nozzles.

  XSI-200D Digital Soldering Station
Ultra High Performance PID tip temperature control system accurately measures and controls the actual tip temperature in real time. Temperature Sensor is attached to the cartridge tip end, which guarantees extremely accurate temperature setting and control.