|Rework System Packages|
|X-FineRework Series Rework System Packages|
Table 1: List of different Series of the X-FineRework Units available for you.
This is base combination of our units to make new generation SMT Rework/Repair system offers precise and accurate monitoring of process temperatures at a working point on a PCB.
|X-FineRework Series||Your Choice of XK-Series Tool Holder and/or Illumination System|
|Please Choose base combination, which BEST suites your needs||Programmable, Intelligent SMT Rework/Repair Unit with connections at the back. Just Patented in US, Japan and Europe||Digital PID Control SMT Rework/Repair Unit with integrated Pre heater, Hot Air Pencil, Iron and vacuum Pick-up||Digital, High Power PCB Pre-Heater for Rework of SMT Technology Boards, with very accurate six zone temperature control||Digital, SMT High Power, Large Area Under board Pre heater||PCB Holder especially designed for this pre-heater to well support large boards||Open Frame Board Holder with X Y micrometer positioning of PCB for boards up to 14" wide||Universal, Retractable Board Holder for boards up to 12" wide|
|What it Contains||FOCUS"X1"||SMT-ServiCE||X-1003||X-1001||XU-6||XU-5||XU-1S|
If you need any other, not listed combination, please contact either the distributor or factory direct at: firstname.lastname@example.org. We will certainly accommodate you and give you what you really need.
Please note that all X-KAR Subsystems are interchangeable. You will be able to add later any other subsystem if you needed. E.g. Use XK-4 instead of XK-2 or change manual lift for Auto-lift or interchange SMT-ServiCE with X-1001 Pre-heater etc.
|XFR-Commander Control Software which brings X-FineRework to another level|
|X485-USB Converter A Converter which allows for connection of FOCUS "X" and SMT-ServiCE to a PC (Desktop or Laptop) to upgrade Firmware (if needed) and to control and program entire system from a PC.|